1300 000 734

FM Receiver Multicoupler 87.5-108MHz


The FM-RMC-1 is a broadband high performance receiver multicoupler (Rx Mux) for the FM broadcast frequency band.

Availability: In stock

Contact RFI Wireless

Click on image to zoom

More Views

FM-RMC-1 Features:

This product can be used in narrowband or wideband FM radio receiver and FM rebroadcast systems to improve system noise figure and signal quality, and to distribute received signals to multiple FM receivers or FM rebroadcast head-end units. An integral FM bandpass preselector filter rejects high level out-of-band signals and protects the FM-RMC-1's low-noise amplifier from overload. RF outputs are provided for up to six (6) FM receivers or FM rebroadcast head-end units to be connected.

-Integral bandpass preselector filter rejects high level out-of-band signals
-Compatible with both narrowband and wideband FM signals
-Low Noise figure improves system performance
-Supports signal distribution to up to six receivers or rebroadcast headends
-Full Range AC Power Supply
-Compact 1RU 19" rack mountable shelf
Antenna Input Return Loss ≥ 15dB (87.5 - 108MHz)
O/P 1dB Compression Point 18 dBm (RF amplifier output)
IP3 36 dBm (RF amplifier output)
Noise Figure (typ.) ≤ 4 dB
Amplifier Gain 15 dB ± 1 dB
Input BPF ≤ -35 dB (@70 MHz) / ≤ -35 dB (@130 MHz)
Output to Output Isolation ≥ 25 dB typical
Overall Conversion Gain - 1 dB ± 1 dB
A/C Input Power 85V to 264V (full range)
Power Consumption Approximately 6 VA
A/C Mains Fuse 1 Amp. (20mm type)
Cooling System Convection
Connector Input: ''N' type Female Output: 6 x 'BNC' Female (Terminate unused ports) A/C Mains: IEC
Temp. Range -10° to +45°C / +14° to +104°F
Operating Altitude ≤2500m / ≤8200ft above sea level
Mechanical Dimensions 483x350x44.4mm / 19x13.8x1in (1RU)
Weight kg lbs 2.4kg / 5.28lbs (approx)

Ask a question about this product

Signupto RFI newsletter