TP1013-1112-11 Features:
• For dedicated transmit antenna systems
• Superior expandability
• Low insertion loss
• RFI Systems support
• Rugged, high quality design
• Peg Rack and other mounting styles available
Note: The use of cavity multicouplers for combining multiple channels with minimum frequency spacings may result in undesirable levels of isolator load heat dissipation due to interchannel coupling. Applications involving such requirements should be discussed with RFI prior to ordering to ensure the optimum solution is provided.
• For dedicated transmit antenna systems
• Superior expandability
• Low insertion loss
• RFI Systems support
• Rugged, high quality design
• Peg Rack and other mounting styles available
Note: The use of cavity multicouplers for combining multiple channels with minimum frequency spacings may result in undesirable levels of isolator load heat dissipation due to interchannel coupling. Applications involving such requirements should be discussed with RFI prior to ordering to ensure the optimum solution is provided.
| Frequency MHz | 108 to 136 MHz |
| Frequency Range | 108-136 MHz |
| Cavity Type and Diameter | ¼ wave, 10” (254mm) |
| Max. Continuous Transmit Power | 150W (higher ratings available) |
| Min. Tx-Tx Separation @ Cavity Loss | 80 KHz @ -1.5 dB 45 KHz @ -2.5 dB |
| Typ. Antenna-Tx Isolation | 70 dB |
| Typ. Tx Noise suppression | Depends on Cavity Loss setting |
| Nominal Input Impedance | 50 Ohms |
| Max. Input return loss (VSWR) | -20 dB (1.22:1) |
| Connectors, Input and Antenna | N female |
| Mechanical Mounting | Refer Mounting Hardware section |
| Dimensions (Typical per-channel) | Refer Cavity Mechanics section |
| Weight (typical per channel) | 11.1Kg (24.5lbs) |
| Isolator Type | Dual Isolator |
| Shipping | Standard packaging - One channel per carton May be shipped pre-assembled in Peg Rack or 483mm (19”) rack kit (ordered separately) |
| Temp. Range | -30° to +60° C (-22° to + 140° F) |
