1300 000 734

Victron Cyrix-i Battery Combiner Kit


The Cyrix-i 12/24-120 kit is for adding a 2nd or 3rd battery system in your car, boat, RV or whatever you wish. It utilises the simplest and most advanced technology to keep all your batteries charged using the engine's electrical system, but isolates the starting battery when charging ceases so you never get stranded.

Availability: In stock

Click on image to zoom

More Views

The Cyrix-i 12/24-120 is a bidirectional voltage sensitive relay. It will therefore also engage if for example the accessory battery is being charged by a battery charger.
Intelligent battery monitoring prevents cycling. The software of the Cyrix does more than simply connect and disconnect based on battery
voltage and with a fixed time delay. The Cyrix looks at the general trend (voltage increasing or decreasing) and reverses a previous action only if the trend has reversed during a certain period of time. The time delay depends on the voltage deviation from the trend.
Emergency parallel feature. An emergency start push button can be wired to the “start assist” connection (85) if required. The relay will engage
during 30 seconds after “start assist” has been momentarily connected to the battery plus. Alternatively, a parallel connect switch can be used to engage the relay as long as the switch remains closed.
Easy to install. There is no need to cut into any factory wiring that may void the manufacturer's warranty of your boat or vehicle.
Cables and lugs included.
- 6 metres RED 10mm² cable
- 0.5 metres BLACK 10mm² cable
- 0.2 metres BLACK 1.5mm² cable assembly with M8 lug and 6.3mm fast on terminal
- 2 pcs M8 cable lug with insulation sleeve
- 4 pcs M6 cable lug with insulation sleeve
- 4 pcs cable tie 150mm

Input Voltage Range V 12V or 24V
Max. Continuous Load Current 120A

Ask a question about this product

Signupto RFI newsletter