COL51-160 Features:
The patented Meander™ collinear element design allows multiple half wave elements to be stacked without the variations in cable lengths and mechanical joints which have typified the construction techniques in high gain collinear antennas. With each dipole element being printed on a single sided PCB the susceptibility to passive intermodulation is practically eliminated. Placing the elements on a board not only controls PIM but also removes manufacturing variations so that each and every antenna will provide the same pattern, tilt and VSWR characteristics over its operating bandwidth.
- Strong Bandwidth
- Internally DC grounded for lightning protection and reduction of precipitation noise
- Tightly controlled radiation patterns for optimum coverage
- Patented Meander PCB design for optimum RF pattern stability
- Full band coverage
- Industry leading PIM ratings (-150dBc) providing low IM and low noise characteristics for optimum performance
- Peak Instantaneous Power 25kw
The patented Meander™ collinear element design allows multiple half wave elements to be stacked without the variations in cable lengths and mechanical joints which have typified the construction techniques in high gain collinear antennas. With each dipole element being printed on a single sided PCB the susceptibility to passive intermodulation is practically eliminated. Placing the elements on a board not only controls PIM but also removes manufacturing variations so that each and every antenna will provide the same pattern, tilt and VSWR characteristics over its operating bandwidth.
| Nominal Gain dBd | 2.1 (0) |
| Frequency MHz | 150 - 160MHz |
| Peak Instantaneous Power kW | 25 |
| Tunable Bandwidth | Full. No tuning required |
| VSWR | <1.5:1 |
| Nominal Impedance Ω | 50 |
| Vertical Beamwidth | 92 |
| Horizontal Beamwidth | Omni +/- 0.5dB |
| Power W | 350 |
| Passive IM 3rd Order (2x20W) dBc | <-150 |
| Construction | Composite fibreglass frame & Aluminium mounting tube |
| Length mm | 2200 |
| Radome Diameter mm | 76 |
| Weight (kg) | 11 |
| Termination | 7/16” DIN fixed female (N type optional*) |
| Mounting Area | 750mm x 90mm diam. aluminium |
| Suggested Clamps (not included) | 2 x UC - 114 |
| Lateral (Thrust) @ 160km/h N | 199 |
| Wind Gust Rating km/h | 240 |
| Torque @ 160km/h Nm | 82 |
PDF Downloads
Digitised Patterns
-
To download the pattern file right click on the file and select “Save Link As”. The desired file format can then be viewed in your network planning software.
