1300 000 734

50dB Crossband Couplers 0-175MHz 450-2000MHz Indoor Mount

SP0000-1113-31

Crossband couplers allow the combining of multiple frequency bands onto shared coaxial and radiating cables and multi-band antennas. Models are available for specialised transmit and receive applications across the frequency range 0.5 - 2500MHz and beyond. Cascading units can allow any number of different frequency bands to be combined together.

Availability: In stock

Contact RFI Wireless

Indoor Unit

More Views

  • Indoor Unit
SP0000-1113-31 Features:

In addition, units are available for indoor, outdoor and tower mounting requirements thereby providing for the rationalisation of feeder cable usage - reducing cabling costs and tower loadings.

• Suits analogue and digital technologies
• Combine multiple frequency bands for Distributed Antenna and Radiating Cable systems
• Reduce cabling and tower loading
• Add new frequency bands to existing installations
• Indoor, outdoor and tower-mount versions available

A crossband coupler is typically a three port device - usually known as low-pass, high-pass and combined respectively. Models are available in a variety of mounting styles and DC-Pass or DC-Blocking configurations for use with bi-directional amplifiers and tower mount preamplifiers. Tower mount (outdoor) models shown consist of the indoor unit less rack mount bracket, in a weatherproof fibreglass housing that is sealed with silicon adhesive. Indoor units may also be packaged in suitable custom weatherproof housings to create alternate tower mount versions.

Notes:
1. Passes DC power between all three terminals for operating separate tower mount receive systems. Warning: Do not connect a DC grounded antenna directly to this model if DC power is being passed.
2. DC power will only pass between the combined port and the 800-960MHz port for operating a 800MHz tower mount receive system.
3. DC power passes between the combined port and the 400-540MHz port, but is blocked from the 25-175MHz port to the combined port.
4. DC power passes between the combined port and the 400-540MHz port, but is blocked from the 800-960MHz port to the combined port.
5. The 0.5-1.6MHz port is coupled onto outside conductor of combined port and 60-1000MHz port is coupled onto centre conductor of combined port. This model is used for combining AM radio rebroadcast with FM/VHF/UHF/etc onto a single cable.
Frequency bands coupled 0 - 175MHz / 450 - 2000MHz
Frequency MHz 0 to 175MHz/450 to 2000MHz
Power Rating (Watts) 200 / 200
Typ. Loss dB 0.50 / 0.50
VSWR 1.3:1
Isolation dB >50dB
Notes 1.
Connector N female (others on request)
Dimensions HxWxL= 31 x 110 x 132 mm / 1.25 x 4.3 x 5.2 in.
Temp. Range -20 to +55° C / -4 to +130° F
Weight kg lbs 1.0 kg / 2.2 lbs
Impedance 50 Ohms

Ask a question about this product


Signupto RFI newsletter